With the help of an industrial manipulator, a rotating wire brush or grinding wheel is clamped, and the burr is polished by the joint arm movement of the manipulator to remove the burr. The manipulator can select wire brushes or grinding wheels from the racks of the tool magazine, which are suitable for deburring on different parts of the part. However, this method is often not suitable for use in many occasions because of the lack of sufficient rigidity and precision of the manipulator.
mechanical method
With the help of an industrial manipulator, the rotating wire pair or grinding wheel is clamped, and the joint arm movement of the manipulator is used to grind the burr part to remove the burr. The manipulator can pick the wire from the shelf of the tool library and brush it into a grinding wheel, which is suitable for different parts of the part. However, this method is often not suitable for use in many occasions due to the lack of sufficient rigidity and precision of the manipulator joints, and due to the different structures of the parts, some parts cannot be deburred by this method, and have to be Equipped with other hair removal equipment.
vibration method
This is designed for the assembly of smaller, equal-shaped hand parts that ask for the essentials of the law. The size refers to the type of the parts, the size and the material does not change accordingly.
Movement and friction to remove burrs, and can also polish the surface of the parts, which can be adjusted according to the strength of the movement to adapt to parts of different sizes
Thermal energy method
The process of thermal dehairing is a time course of oxidizing components at high temperatures. The hot boat type hair removal machine seals the parts with wool in a container filled with high-pressure combustible gas and air in combination with Huangqi. Surrounded by gas, sparks win Kelu together with gas. After it is done, it produces the high temperature heat wave of the general system, because the ratio of the surface area of the wool part to the gas is quite high, the wool is burnt, and the burr is continuously oxidized and transformed into powder, and then use the melt to clean the workpiece.
This method is a well-known method of deburring, which can remove unwanted material from all parts from its surface, and even remove burrs from hard-to-reach internal recesses and intersecting holes, while There is no need to check afterwards, therefore, dehairing process water for non-ferrous and non-ferrous metal parts
Electrochemical method
Electrochemical (also physical and electrical 4) de-powering machine is through electrochemical reaction, the metal material is dropped from the parts into the electrolyte, so as to remove the burrs on the parts, the tool electrode is connected to the negative root of the current power supply, and there are burrs. The parts are aided at the positive pole of the power supply, through a full pressure and flow rate electrolysis in the middle. The metal that is the anode will fall off and undergo electrochemical activation to achieve the purpose of removing burrs (or forming). TFF
The electric terminal method can effectively remove the electric stroke of any ruler pair, and the self-inductance is very high. In the process of processing, because the tool electrode (Ming pole) is not diffused, its position can be fixed, so the operation schedule is simple, the production department is generally used for automatic processing, and the range of hardness and hardness in the process is wide.
Post time: Jun-28-2022