Link：https://www.grouphaohan.com/mirror-finish-achieved-by-flat-machine-product/
Stainless Steel Plate Surface Polishing Treatment Program
I. Introduction
Stainless steel is widely used in various industries due to its excellent corrosion resistance, durability, and hygienic properties. However, the surface of stainless steel can easily become scratched or dull, which not only affects its appearance but also reduces its surface cleanliness, making it more prone to corrosion. Therefore, surface polishing treatment is necessary to restore the original appearance and performance of stainless steel plates.
II. Surface Polishing Process
The surface polishing process of stainless steel plates is generally divided into three steps: pre-polishing, main polishing, and finishing.
1. Pre-polishing: Before polishing, the surface of the stainless steel plate needs to be cleaned to remove any dirt, grease, or other contaminants that may affect the polishing process. This can be done by wiping the surface with a clean cloth soaked in alcohol or acetone. If the surface is severely corroded, a rust remover may be used to remove the rust first. After cleaning, the surface can be roughened with a coarse sandpaper or abrasive pad to remove any scratches, dents, or pits.
2. Main polishing: After pre-polishing, the main polishing process can begin. There are various methods of main polishing for stainless steel plates, including mechanical polishing, electrochemical polishing, and chemical polishing. Mechanical polishing is the most common method, which involves using a series of abrasives with gradually finer grit sizes to remove any remaining scratches or imperfections on the surface. Electrochemical polishing is a non-abrasive method that uses an electrolyte solution and an electricity source to dissolve the surface of the stainless steel, resulting in a smooth and shiny surface. Chemical polishing involves using a chemical solution to dissolve the surface of the stainless steel, similar to electrochemical polishing, but without the use of electricity.
3. Finishing: The finishing process is the final step of surface polishing, which involves further smoothing and polishing the surface to achieve the desired level of shine and smoothness. This can be done by using a series of polishing compounds with gradually finer grit sizes, or by using a polishing wheel or buffing pad with a polishing agent.
III. Polishing Equipment
To achieve a high-quality surface polishing for stainless steel plates, the right polishing equipment is necessary. The equipment needed typically includes:
1. Polishing machine: There are various types of polishing machines available, including rotary polishers and orbital polishers. The rotary polisher is more powerful and faster, but more difficult to control, while the orbital polisher is slower but easier to handle.
2. Abrasives: A range of abrasives with different grit sizes are needed to achieve the desired level of surface roughness and finish, including sandpaper, abrasive pads, and polishing compounds.
3. Polishing pads: The polishing pad is used for applying the polishing compounds and can be made of foam, wool, or microfiber, depending on the desired level of aggressiveness.
4.Buffing wheel:The buffing wheel is used for the finishing process and can be made of various materials, such as cotton or sisal.
IV. Conclusion
Surface polishing is a necessary process for stainless steel plates to restore their appearance and performance. By following the three-step process of pre-polishing, main polishing, and finishing, and using the right polishing equipment, high-quality surface polishing can be achieved. Furthermore,regular maintenance and cleaning can also help prolong the service life of stainless steel plates.
Post time: Apr-25-2023