Some of you may not know much about polishers because they are not commonly used in daily life, so if we need them, we don’t know how to operate them. So how does a polisher work? What is the method.
Use the polisher program
1. Turn on the machine and turn on the “emergency stop” button;
2. Adjust the water tank slot, clamp the water tank, record the data of each slot, and take a picture of the caliper position (note: the drop hole is aligned with the center of the turntable);
3. Number and “reset” the program name to the original position;
4. Adjust the depth of the grinding wheel, pay attention to the lower limit position of the sensor and the position of the screw;
5. Reset the existing data, press “Debug Stop”, the “Debug Start” light is on, and the debugging starts. The steps are as follows:
(1) “Before the grinding wheel”, push the grinding wheel forward to the proper position;
(2) “The workpiece is” the workpiece rotates at a certain angle;
(3) “rear grinding wheel”, the grinding wheel passes through the appropriate position, so that the grinding wheel is in close contact with the arc of the tank.
6. After the polishing machine is debugged, “monitor” the data to check whether there is any abnormal data. If it is, fix it;
7. After the debugging is completed, press “Debugging Start”, the debugging start light is off, and the debugging is over; adjust to the “Automatic” gear, then “Reset”, turn on “Automatic Start”, and try throwing the tank;
8. Check polishing effect, correct and complete debugging.
Specific requirements for choosing a stainless steel polisher:
(1) The stainless steel polishing machine produces good beam quality, including the stability of patterns and molds;
(2) Whether the output power of the stainless steel polishing machine is large enough (this is the key to the speed and effect), and whether the energy is stable (usually it needs to be stable by 2%, sometimes 1%, to achieve the ideal processing effect);
(3) The stainless steel polishing machine should have high reliability and should be able to work continuously in harsh industrial processing environments;
(4) The stainless steel polishing machine itself should be well maintained, and the fault diagnosis consists of Delta u > shrimp soil; the operation of the swimming pool
(5) The operation is simple and convenient, and the function of the control key is clear, which can refuse illegal operation and protect the stainless steel polishing machine from damage. The selection of stainless steel polishing machine should follow the following principles: stainless steel polishing machine technology has many valuable characteristics.
However, as to whether the product is suitable for the technology, the following principles should be followed:
(1) It cannot be solved by other existing methods, and can only be solved by polishing;
(2) It can be solved by other existing processing methods, but the polishing processing method can greatly improve product quality, improve production efficiency, and significantly improve economic and social benefits;
(3) The supporting links related to polishing should be fully considered during the processing;
(4) Pay attention to the application of polishing processing technology and conventional processing technology, and give full play to its advantages;
(5) In practical applications, if the economy is not tight, it is recommended to purchase imported configuration, because some domestic technologies do not meet the requirements, and foreign configuration machines have stable performance and less after-sales maintenance, which greatly improves work efficiency.
Post time: Apr-22-2022